Rigel-systems Infralite Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Dispositifs optiques Rigel-systems Infralite. Rigel Systems Infralite User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop
over thumb knob.
1
2
Résumé du contenu
Produits connexes et manuels pour Dispositifs optiques Rigel-systems Infralite
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.172 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels